10m Triple-Stepped Ringlock LED Support Framework with 6m-Deep Rear Bracing
A 10m-wide, 6m-deep modular Ringlock LED support framework featuring three stepped structural heights: 10m at the front, 4m in the middle and 2m at the rear. The configuration combines Ringlock standards, horizontal pipes, diagonal braces, adjustable bases, 27 additional steel braces and five 2.8m section beams to create an independent temporary LED-support structure for concerts and live events.
These connect the vertical standards across the modular bays.
The horizontal members form part of the widthwise and front-to-rear Ringlock arrangement.
The repeated 2m length is one of the defining characteristics of this structure.
The overall framework is 10m wide and 6m deep, but the exact distribution of horizontal pipes across each level and zone must follow the confirmed drawing.
10. Diagonal Bracing — 113 Pieces
The BOQ contains:
113 × LR3 Diagonal Pipes, L = 2.44m
These diagonal members form part of the braced Ringlock framework.
The structure uses diagonal bracing across its stepped support arrangement.
This is especially relevant because the framework is not limited to a single vertical support face.
It extends through multiple structural zones with different heights.
The presence of 113 diagonal members is a confirmed component characteristic.
It should not be converted into a calculated lateral-load capacity or wind rating.
11. Adjustable Bases — 24 Pieces
The structure includes:
24 × LR4 Adjustable Bases, H = 0.25m
These components provide adjustable lower support positions.
They belong to the main Ringlock framework.
The adjustable bases are not equivalent to a complete foundation or stabilization design.
The final installation may require project-specific measures depending on the site, ground conditions, equipment arrangement and applicable engineering requirements.
No universal ballast or anchoring quantity can be derived from the published BOQ.
12. Additional Steel Braces — 27 Pieces
One important difference from the smaller Ringlock LED structures is the inclusion of an additional steel-brace group.
The source lists:
27 × Steel Braces
with dimensions:
L = 2m, H = 0.5m
These components are separate from the 113 standard Ringlock diagonal pipes.
They form part of the configured support arrangement.
This distinction should be preserved in the BOQ rather than combining all bracing components into one category.
The published product describes these members as part of the lower support framework.
However, their exact connection details and structural contribution must follow the reference drawing.
13. Section Beams — 5 Pieces
The source also lists:
5 × Section Beams, L = 2.8m
These are separate from the standard 2m Ringlock horizontal pipes.
Their inclusion indicates that the structure contains additional beam components beyond the ordinary Ringlock pipe-and-brace system.
The original source identifies them as part of the configured structural assembly.
It does not provide enough information to assign a specific allowable load, certified support function or detailed connection method to each beam.
For that reason, the section beams should remain a separate confirmed component group.
14. Why the Steel Braces and Section Beams Matter
The 10×6×10m structure is not simply a larger version of a basic LED support wall.
Its BOQ includes:
Standard Ringlock Components
Vertical standards
Horizontal pipes
Diagonal braces
Adjustable bases
Additional Structural Components
27 steel braces
5 section beams
This distinction is important because it shows that the configuration uses more than the basic modular pipe arrangement.
The steel braces and section beams form part of the specific support layout for this screen tower.
Their presence is one of the key features separating this product from smaller Ringlock LED frameworks.
15. How the Three Structural Zones Work Together
The complete structure can be understood as four functional modules.
Module A — Front LED Support Framework
The 10m-high front section creates the main screen-support face.
Module B — Intermediate Rear Framework
The 4m-high middle section creates an additional structural zone behind the front.
Module C — Lower Rear Framework
The 2m-high rear section completes the stepped rear arrangement.
Module D — Bracing and Beam Components
Horizontal pipes, diagonal braces, adjustable bases, steel braces and section beams connect and complete the supplied configuration.
The central structural relationship is:
Tall Front Support + Intermediate Rear Support + Lower Rear Support + Bracing System
This is a structural breakdown of the published configuration, not a calculated load-path analysis.
16. Why the 6m Structural Depth Is Important
The overall depth is 6m.
This gives the framework considerably more front-to-rear space than a shallow LED support wall.
The depth accommodates the middle and rear support zones.
It also provides space for the modular horizontal and diagonal bracing arrangement.
This is a meaningful geometric difference.
However, a deeper framework should not automatically be described as having a verified higher load capacity.
The actual performance depends on the complete structure, connections, screen installation, site conditions and engineering verification.
17. LED Screen Size vs Support Framework Size
The structure is 10m wide and reaches 10m high at the front.
These dimensions describe the supporting framework.
They do not confirm an LED display measuring 10m × 10m.
The actual LED screen may occupy a different area.
Before finalizing the installation, the following information should be confirmed:
LED screen width
LED screen height
Cabinet dimensions
Number of cabinets
Total screen weight
Installation elevation
Mounting method
Required service access
The LED display itself is not included in the confirmed structural BOQ.
The primary functional category for temporary LED-support systems, including narrow-depth support walls, stepped frameworks and independent screen towers.
DragonStructure explains how the 10m front framework, 4m middle section, 2m rear section and additional support components form one temporary LED-support system.
DragonTruss provides the original commercial product listing, current pricing and supply information.
Customized dimensions, LED installation requirements or additional equipment may affect the final quotation.
FAQ
1. What is the overall size of this LED support structure?
The structure measures approximately 10m wide and 6m deep, with a maximum front height of 10m.
2. Why does the structure have three different heights?
The front section is 10m high, the middle section is 4m high and the rear section is 2m high. These form the stepped modular support arrangement behind the main LED installation face.
3. Is this a flat LED support wall?
No. It is a multi-row Ringlock framework extending 6m in depth, with three stepped structural zones.
4. How many vertical standards are included?
The BOQ includes 78 LR1 vertical standards, each 2m long.
5. How many horizontal and diagonal members are included?
The structure contains 151 horizontal pipes at 2m and 113 diagonal pipes at 2.44m.
6. What are the additional steel braces?
The package includes 27 steel braces measuring 2m long and 0.5m high. They are separate from the standard Ringlock diagonal pipes and form part of the configured support arrangement.
7. What are the section beams?
The BOQ lists five 2.8m section beams. They are additional structural components within the reference configuration. Their exact connections and allowable loads must be confirmed separately.
8. Does the structure include LED screens?
No. The confirmed BOQ describes the support structure and listed structural components. The LED display and associated equipment are not automatically included.
9. Does the 10m front height mean the LED display can be 10m high?
Not necessarily. The 10m dimension describes the front support framework. The actual LED screen dimensions, weight and installation position require separate confirmation.
10. How does this differ from the 8x4m stepped Ringlock LED structure?
The 8×4m structure uses a 6m-high front and 4m-high rear arrangement. This product uses three structural levels of 10m, 4m and 2m, with a 6m overall depth and additional steel braces and section beams.
11. Is this a complete concert stage?
No. It is a dedicated temporary LED-support framework, not a complete performance stage or roof system.
12. Can the dimensions be customized?
Yes. Width, depth, height and stepped support layout may be adapted according to the actual LED installation and project requirements.
13. Is the structure approved for a specific wind speed?
The published information does not provide a verified wind rating or allowable wind speed. Outdoor installations require appropriate project-specific structural verification.
14. Does the product include ballast?
Ballast is not listed in the confirmed BOQ. This does not establish that ballast or anchoring is unnecessary for a particular installation.
Why Rental Companies Put Ground-Supported LED Walls on Stage Risers—and What We Check Before Recommending It
Why Rental Companies Put Ground-Supported LED Walls on Stage Risers—and What We Check Before Recommending ItProject BackgroundThis case analysis started from a public discussion in the video-engineering industry.The question was simple:Why are more ground-supported LED walls being installed on stage
2026-10-30
How We Turned Standard Stage Stairs into a Movable Indoor Venue Entrance System
How We Turned Standard Stage Stairs into a Movable Indoor Venue Entrance SystemProject BackgroundThis project came from an indoor sports and event venue in the Americas.For confidentiality reasons, we do not identify the country or whether the venue is located in North or South America.The venue had
2026-11-13
Why We Use Pivoting Adjustable Stairs Between Different Stage Heights
Why We Use Pivoting Adjustable Stairs Between Different Stage HeightsProject BackgroundA common question in temporary stage systems is:Can one stair unit be used with different stage heights?At first, this sounds like a simple compatibility question.But from a stage manufacturer's point of view, the
2026-11-06
Why a Single Clamped Tube Can Make an LED Wall Difficult to Keep Vertical
Why a Single Clamped Tube Can Make an LED Wall Difficult to Keep VerticalProject BackgroundThis case analysis started from a public video-engineering discussion.The user needed to mount LED panels onto a truss structure.The tested solution used:a single horizontal tube;O-clamps / tube clamps;LED mod
2026-10-17
Why We Split Large Custom Bar Truss Structures After the Overall Design Is Approved
Why We Design Large Custom Bar Truss as One Structure First—and Then Split It for Production and Site AccessProject BackgroundMany of our custom aluminum-truss projects for bars, clubs and entertainment venues begin with the same contradiction.The venue owner or design team wants a large, visually c
Why Rental Companies Put Ground-Supported LED Walls on Stage Risers—and What We Check Before Recommending It
Why Rental Companies Put Ground-Supported LED Walls on Stage Risers—and What We Check Before Recommending ItProject BackgroundThis case analysis started from a public discussion in the video-engineering industry.The question was simple:Why are more ground-supported LED walls being installed on stage
2026-10-30
How We Turned Standard Stage Stairs into a Movable Indoor Venue Entrance System
How We Turned Standard Stage Stairs into a Movable Indoor Venue Entrance SystemProject BackgroundThis project came from an indoor sports and event venue in the Americas.For confidentiality reasons, we do not identify the country or whether the venue is located in North or South America.The venue had
2026-10-30
Why We Use Pivoting Adjustable Stairs Between Different Stage Heights
Why We Use Pivoting Adjustable Stairs Between Different Stage HeightsProject BackgroundA common question in temporary stage systems is:Can one stair unit be used with different stage heights?At first, this sounds like a simple compatibility question.But from a stage manufacturer's point of view, the
2026-11-13
Why a Single Clamped Tube Can Make an LED Wall Difficult to Keep Vertical
Why a Single Clamped Tube Can Make an LED Wall Difficult to Keep VerticalProject BackgroundThis case analysis started from a public video-engineering discussion.The user needed to mount LED panels onto a truss structure.The tested solution used:a single horizontal tube;O-clamps / tube clamps;LED mod
2026-11-06
Why We Split Large Custom Bar Truss Structures After the Overall Design Is Approved
Why We Design Large Custom Bar Truss as One Structure First—and Then Split It for Production and Site AccessProject BackgroundMany of our custom aluminum-truss projects for bars, clubs and entertainment venues begin with the same contradiction.The venue owner or design team wants a large, visually c
DragonStructure is a specialized platform created to explore modular temporary structures, structural applications and system integration for events and other professional temporary-structure projects.