6×4×6m Ringlock LED Hanging Frame with Four Top Beams and Rear Water-Ballast Zone
A 6m-wide, 4m-deep and 6m-high modular Ringlock structure configured for a 6×4m LED screen. The system combines a braced Ringlock framework, four 2.8m upper hanging beams, nine pallet components and a three-unit rear water-ballast arrangement. It is intended for temporary ground-supported LED installations at concerts, festivals and other live events.
This structure is a modular Ringlock LED hanging framework designed for temporary event installations.
The confirmed overall dimensions are:
6m Width × 4m Depth × 6m Height
The reference LED screen configuration is:
6m Width × 4m Height
The structure combines three main functional systems:
Ringlock Support Framework
Four Upper Hanging Beams
Rear Water-Ballast Arrangement
Unlike a narrow LED support wall that relies mainly on a compact pipe-and-brace framework, this configuration incorporates dedicated upper hanging members and a separately described counterweight arrangement.
The result is a temporary ground-supported LED framework in which the screen-support area, rear structural depth and ballast positions are considered together.
1. What Is This Structure?
The structure is an independent temporary LED screen support system assembled primarily from modular Ringlock components.
Its main framework is 6m wide, 4m deep and 6m high.
The LED screen is configured at 6m wide and 4m high.
Four 2.8m upper sections form the specified hanging-member arrangement.
Three water-ballast units are positioned at the lower rear area as part of the reference counterweight configuration.
The system is not a complete performance stage or roof.
Its primary purpose is to create a dedicated structural framework for a temporary LED display without depending on a permanent building structure.
2. Overall Structural Configuration
Item
Confirmed Specification
Overall Width
6m
Overall Depth
4m
Overall Height
6m
Reference LED Screen Width
6m
Reference LED Screen Height
4m
Nominal LED Display Area
24m²
Main Structural System
Modular Ringlock
Vertical Standard Length
2m
Horizontal Member Length
2m
Diagonal Member Length
2.44m
Adjustable Base Height
0.25m
Upper Hanging Members
4 × 2.8m section beams
Water-Ballast Arrangement
3 units
Pallet Components
9 pcs
Main Application
Temporary LED screen support
Performance Stage
Not included
Roof Structure
Not included
The 24m² display area is calculated directly from the stated 6m × 4m screen dimensions. It does not establish the screen weight or structural capacity.
3. Main Ringlock Support Framework
The main structural body is assembled from Ringlock vertical standards, horizontal pipes, diagonal members and adjustable bases.
The framework provides the principal modular structure around which the upper hanging and lower ballast arrangements are configured.
The 6m overall height is consistent with the use of repeated 2m vertical modules.
The 6m width and 4m depth are also compatible with the 2m horizontal member system.
However, the exact distribution of standards, horizontal members and diagonals must follow the final assembly drawing.
The structure should be understood as a complete three-dimensional framework rather than a flat row of posts.
For the modular system behind this configuration, see Ringlock Structure.
4. Complete Bill of Quantities (BOQ)
The following quantities are taken from the original DragonTruss product listing.
No.
Component
Specification
Quantity
1
Horizontal Pipe
L = 2m
61 pcs
2
Diagonal Pipe LR3
L = 2.44m
44 pcs
3
Pillar / Vertical Standard LR1
L = 2m
32 pcs
4
Adjustable Base LR4
H = 0.25m
12 pcs
5
Steel Brace
L = 2m, H = 0.5m
12 pcs
6
Section Beam
L = 2.8m
4 pcs
7
Pallet
Source-listed component
9 pcs
Published water-ballast arrangement: 3 units
Packing Weight: Approximately 1,550kg
Packing Volume: Approximately 3.5CBM
The water-ballast arrangement is confirmed in the original product description, but the three water-ballast units are not separately itemized in the published BOQ table.
The actual supply scope for water tanks, filling arrangements and related accessories should therefore be confirmed in the commercial quotation.
5. Vertical Standards — 32 Pieces
The main framework includes:
32 × LR1 Vertical Standards, L = 2m
These components form the upright elements of the Ringlock structure.
The overall height is 6m, which corresponds geometrically to three 2m vertical modules.
This modular relationship is useful for understanding how the structure is configured.
However, the total quantity of 32 standards does not establish the exact number of vertical support positions or the distribution of every standard.
The assembly drawing determines those details.
6. Horizontal Pipes — 61 Pieces
The framework includes:
61 × Horizontal Pipes, L = 2m
These members connect the vertical standards across the modular bays.
The use of 2m horizontal components is consistent with the nominal 6m width and 4m depth.
They form part of the main structural framework and its front-to-rear connections.
The horizontal pipes should not be confused with the four dedicated upper hanging beams.
These are separate component groups with different intended functions.
7. Diagonal Bracing — 44 Pieces
The BOQ contains:
44 × LR3 Diagonal Pipes, L = 2.44m
These form part of the Ringlock bracing arrangement.
The structure has a 4m front-to-rear depth, so the support framework is not limited to the screen installation face.
The diagonal members are distributed within the modular structure according to the reference configuration.
Their quantity is confirmed, but their precise positions and structural contribution must follow the actual drawing.
No allowable wind rating or lateral-load capacity can be established from the number of diagonal braces alone.
8. Adjustable Bases — 12 Pieces
The structure includes:
12 × LR4 Adjustable Bases, H = 0.25m
These provide adjustable lower support positions.
The bases form part of the main Ringlock assembly.
They should not be treated as a complete foundation system.
Actual leveling, ground bearing, anchoring and stabilization requirements depend on the project conditions.
9. Additional Steel Braces — 12 Pieces
The published configuration includes:
12 × Steel Braces, L = 2m, H = 0.5m
These are separate from the 44 standard Ringlock diagonal pipes.
This distinction should remain visible in the BOQ.
The additional steel braces form part of the specified structural arrangement.
Their exact installation positions and connection details should follow the reference drawing.
The published product does not establish an independent rated capacity for these braces.
10. Four Upper Hanging Beams
One of the defining features of this structure is the upper hanging-member arrangement.
The BOQ includes:
4 × Section Beams, L = 2.8m
The original product identifies these as the top sections associated with the LED screen hanging layout.
These beams are therefore different from the standard Ringlock horizontal members.
The four-beam configuration is an important part of the product's structural identity.
The system can be understood as:
Ringlock Main Framework → Upper Section Beams → LED Hanging Interface
However, the original product does not provide the complete connection details, individual beam ratings or verified hanging-point capacities.
The number of upper beams should not be interpreted as confirmation of four independently rated lifting points.
The final LED cabinet hanging arrangement must be checked against the actual screen manufacturer's requirements.
11. Three Rear Water-Ballast Units
The original product describes:
3 Water-Ballast Units
These are arranged in the lower rear area of the framework.
The purpose of this arrangement is to provide counterweight support as part of the temporary installation configuration.
The rear ballast zone is an important structural feature because the system is not simply a front-facing LED hanging frame.
It includes a deeper rear support area associated with the ballast arrangement.
The configuration can be described as:
Front LED Hanging Area + 4m-Deep Ringlock Framework + Rear Water-Ballast Zone
The published information does not specify:
Water-tank capacity
Filled water weight per tank
Total installed ballast mass
Exact ballast connection method
Verified ballast adequacy
Ground-bearing requirements
The presence of three water-ballast units is a confirmed reference arrangement, not a universal stabilization prescription.
For a real project, the required ballast must be verified according to the actual installation conditions.
12. Nine Pallet Components
The BOQ includes:
9 × Pallets
These are separate from the ordinary Ringlock standards, horizontal pipes and diagonal members.
The pallet components form part of the lower structural configuration.
They may be associated with platform or support areas within the reference arrangement.
However, the published BOQ does not establish the exact function of each pallet.
Therefore, the nine pallets should not automatically be described as nine working platforms or nine individual ballast supports.
Their positions and intended functions should follow the final drawing.
13. How the Upper Hanging System and Rear Ballast Zone Relate
The most useful way to understand this product is to separate the structure into three functional areas.
Front LED Hanging Area
The 6m × 4m LED screen is arranged at the front of the supporting framework.
Main Ringlock Support Body
The 6×4×6m Ringlock structure provides the modular framework around the LED installation.
Rear Ballast Area
Three water-ballast units are described at the lower rear area.
These zones form one coordinated temporary structure.
The upper hanging members and rear ballast arrangement are part of the same overall configuration.
However, the published information is not sufficient to calculate or verify the complete load path, hanging capacity or stabilization performance.
14. Why the 4m Structural Depth Matters
The framework is 4m deep.
This creates space behind the LED display for the modular Ringlock arrangement and the described rear ballast zone.
It is different from a narrow-depth support wall that uses only a 1m front-to-rear framework.
The additional depth is a confirmed geometric feature.
It does not automatically mean that the structure can support a heavier LED screen or withstand a higher wind speed.
Those questions depend on the complete structural configuration and engineering verification.
15. LED Screen Dimensions vs Structure Dimensions
The reference LED screen is:
6m Wide × 4m High
The supporting structure is:
6m Wide × 4m Deep × 6m High
The difference between the 4m screen height and the 6m overall structure height is important.
The framework extends above the nominal LED display height.
This allows the published configuration to include the upper hanging-member arrangement.
However, the exact screen-bottom elevation, hanging-point elevation and clearance dimensions are not specified.
17. Difference from a Stepped Ringlock LED Framework
Another type of Ringlock LED support structure uses front and rear sections of different heights.
For example, a stepped framework may have a 6m-high front section and a 4m-high rear section.
The present product should not automatically be described as a stepped structure.
Its published specifications confirm a 6×4×6m overall framework, four top hanging beams and a three-unit rear ballast arrangement.
The original product does not specify separate front and rear framework heights.
Therefore, its distinguishing feature is the integration of the upper hanging and rear ballast systems, rather than a confirmed stepped-height profile.
DragonStructure explains how the modular Ringlock framework, upper hanging beams and rear water-ballast arrangement form the reference LED-support structure.
DragonTruss provides the original commercial listing, current pricing and supply information.
For customized dimensions, alternative LED screen configurations or project-specific stabilization requirements, the final quotation may differ from the published product.
Customers should also confirm whether the water tanks, filling equipment and associated accessories are included in the quoted supply package.
FAQ
1. What is the overall size of this Ringlock LED structure?
The structure measures 6m wide, 4m deep and 6m high.
2. What LED screen size is the structure configured for?
The reference configuration is intended for a 6m-wide × 4m-high LED screen.
3. How many upper hanging beams are included?
The BOQ includes four section beams, each 2.8m long.
4. What is the purpose of the upper section beams?
The original product identifies them as upper hanging members for the LED installation. Their exact connection details and allowable loads must be confirmed for the project.
5. How many water-ballast units are described?
The reference configuration describes three water-ballast units in the lower rear area.
6. Are the water tanks included in the BOQ?
The original product description confirms a three-unit water-ballast arrangement, but the published BOQ does not separately list the water tanks as a quantified supply item. Their inclusion should be confirmed in the quotation.
7. How much water ballast is required?
The published information does not specify tank capacity or required ballast mass. The appropriate amount must be determined for the actual installation.
8. How many vertical standards are included?
The structure contains 32 Ringlock vertical standards, each 2m long.
9. How many horizontal and diagonal pipes are included?
The BOQ contains 61 horizontal pipes at 2m and 44 diagonal pipes at 2.44m.
10. What are the additional steel braces?
The package includes twelve steel braces measuring 2m long and 0.5m high. These are separate from the standard Ringlock diagonal members.
11. How many pallets are included?
The BOQ includes nine pallet components. Their exact positions and functions must follow the final drawing.
12. Is the LED screen included?
The confirmed BOQ covers the support structure and listed components. The LED display itself is not separately included in the published component list.
13. Is this a stepped Ringlock LED support structure?
The original product does not specify different front and rear structural heights. Its confirmed defining features are the 6×4×6m framework, four upper hanging beams and three-unit rear ballast arrangement.
14. Can this structure be used outdoors?
It is intended for temporary event applications, including outdoor installations. Final suitability depends on the site, wind conditions, LED equipment and project-specific structural verification.
15. Can the structure be customized?
Yes. Framework dimensions, LED screen size, upper hanging arrangement and ballast configuration can be discussed according to the project requirements.
Why Rental Companies Put Ground-Supported LED Walls on Stage Risers—and What We Check Before Recommending It
Why Rental Companies Put Ground-Supported LED Walls on Stage Risers—and What We Check Before Recommending ItProject BackgroundThis case analysis started from a public discussion in the video-engineering industry.The question was simple:Why are more ground-supported LED walls being installed on stage
2026-10-30
How We Turned Standard Stage Stairs into a Movable Indoor Venue Entrance System
How We Turned Standard Stage Stairs into a Movable Indoor Venue Entrance SystemProject BackgroundThis project came from an indoor sports and event venue in the Americas.For confidentiality reasons, we do not identify the country or whether the venue is located in North or South America.The venue had
2026-11-13
Why We Use Pivoting Adjustable Stairs Between Different Stage Heights
Why We Use Pivoting Adjustable Stairs Between Different Stage HeightsProject BackgroundA common question in temporary stage systems is:Can one stair unit be used with different stage heights?At first, this sounds like a simple compatibility question.But from a stage manufacturer's point of view, the
2026-11-06
Why a Single Clamped Tube Can Make an LED Wall Difficult to Keep Vertical
Why a Single Clamped Tube Can Make an LED Wall Difficult to Keep VerticalProject BackgroundThis case analysis started from a public video-engineering discussion.The user needed to mount LED panels onto a truss structure.The tested solution used:a single horizontal tube;O-clamps / tube clamps;LED mod
2026-10-17
Why We Split Large Custom Bar Truss Structures After the Overall Design Is Approved
Why We Design Large Custom Bar Truss as One Structure First—and Then Split It for Production and Site AccessProject BackgroundMany of our custom aluminum-truss projects for bars, clubs and entertainment venues begin with the same contradiction.The venue owner or design team wants a large, visually c
Why Rental Companies Put Ground-Supported LED Walls on Stage Risers—and What We Check Before Recommending It
Why Rental Companies Put Ground-Supported LED Walls on Stage Risers—and What We Check Before Recommending ItProject BackgroundThis case analysis started from a public discussion in the video-engineering industry.The question was simple:Why are more ground-supported LED walls being installed on stage
2026-10-30
How We Turned Standard Stage Stairs into a Movable Indoor Venue Entrance System
How We Turned Standard Stage Stairs into a Movable Indoor Venue Entrance SystemProject BackgroundThis project came from an indoor sports and event venue in the Americas.For confidentiality reasons, we do not identify the country or whether the venue is located in North or South America.The venue had
2026-10-30
Why We Use Pivoting Adjustable Stairs Between Different Stage Heights
Why We Use Pivoting Adjustable Stairs Between Different Stage HeightsProject BackgroundA common question in temporary stage systems is:Can one stair unit be used with different stage heights?At first, this sounds like a simple compatibility question.But from a stage manufacturer's point of view, the
2026-11-13
Why a Single Clamped Tube Can Make an LED Wall Difficult to Keep Vertical
Why a Single Clamped Tube Can Make an LED Wall Difficult to Keep VerticalProject BackgroundThis case analysis started from a public video-engineering discussion.The user needed to mount LED panels onto a truss structure.The tested solution used:a single horizontal tube;O-clamps / tube clamps;LED mod
2026-11-06
Why We Split Large Custom Bar Truss Structures After the Overall Design Is Approved
Why We Design Large Custom Bar Truss as One Structure First—and Then Split It for Production and Site AccessProject BackgroundMany of our custom aluminum-truss projects for bars, clubs and entertainment venues begin with the same contradiction.The venue owner or design team wants a large, visually c
DragonStructure is a specialized platform created to explore modular temporary structures, structural applications and system integration for events and other professional temporary-structure projects.