8m Ringlock Line Array Support Frame with 4×2m Base and Pallet Modules
An 8m-high modular Ringlock line array support structure with a 4m-wide × 2m-deep footprint. The configuration combines vertical standards, horizontal members, diagonal bracing, adjustable bases, two different steel-brace groups and six pallet modules. It provides a structural framework for temporary concert sound installations, with the final speaker suspension interface determined by the actual project requirements.
This structure is a temporary Ringlock support frame intended for line array speaker installations at concerts, festivals and live events.
Its overall dimensions are:
4m Wide × 2m Deep × 8m High
The structure uses modular Ringlock components rather than a conventional aluminum truss tower.
The confirmed assembly contains:
Main vertical Ringlock framework
Horizontal and diagonal members
Adjustable base supports
Two different steel-brace groups
Six pallet modules
The structural arrangement is relatively compact in depth while providing an 8m-high support framework.
The original product identifies line array speaker suspension as its intended application.
However, the published BOQ does not separately identify the complete speaker hanging interface. The actual suspension arrangement must therefore be confirmed for the intended speaker system.
What Is This Structure?
This product is a modular temporary sound-support structure.
The Ringlock framework creates the main vertical tower.
Horizontal members connect the standards into a modular grid.
Diagonal members provide bracing within the specified arrangement.
Additional steel braces form a separate component group.
Adjustable bases provide the lower support positions.
Six pallets are included as part of the supplied structure.
The complete arrangement is intended to support a line array installation once the required suspension components and project-specific structural conditions have been confirmed.
Unlike an LED background wall, its primary function is sound-system support.
Unlike a complete concert stage, it does not include a performance platform or roof system.
Overall Structural Configuration
Item
Specification
Overall Width
4m
Overall Depth
2m
Overall Height
8m
Nominal Footprint
8m²
Main Structure
Modular Ringlock
Vertical Standard Length
2m
Horizontal Member Length
2m
Diagonal Member Length
2.44m
Adjustable Base Height
0.25m
Steel Brace Type 1
2m long × 0.5m high
Steel Brace Type 2
2m long × 0.25m high
Pallets
6 pcs
Main Application
Line array speaker support
Speaker Hanging Interface
To be confirmed
Roof
Not included
Performance Stage
Not included
The 4×2m dimensions describe the overall tower footprint, not the size of the speaker array.
1. Main Ringlock Tower Framework
The main structure is built from modular Ringlock components.
Its maximum height is 8m.
The repeated 2m vertical standards allow the framework to be configured using standard modular lengths.
The main tower combines vertical standards with horizontal and diagonal connections.
The exact positions of the individual members must follow the reference assembly drawing.
The structural concept is:
Vertical Ringlock Standards
Horizontal Connections
Diagonal Bracing
Base Supports
The result is a modular vertical framework intended for temporary sound-system support.
The following component quantities are taken from the original DragonTruss product listing.
No.
Component
Specification
Quantity
1
Horizontal Pipe
L = 2m
35 pcs
2
Diagonal Pipe LR3
L = 2.44m
29 pcs
3
Pillar / Vertical Standard LR1
L = 2m
22 pcs
4
Adjustable Base LR4
H = 0.25m
8 pcs
5
Steel Brace
L = 2m, H = 0.5m
2 pcs
6
Steel Brace
L = 2m, H = 0.25m
2 pcs
7
Pallet
Source-listed component
6 pcs
Packing Weight: Approximately 750kg
Packing Volume: Approximately 2CBM
These quantities describe the supplied reference configuration.
The packing weight is a shipping figure, not an allowable suspended load.
3. Vertical Standards — 22 Pieces
The BOQ includes:
22 × LR1 Vertical Standards, L = 2m
These form the upright elements of the Ringlock framework.
The 8m overall height corresponds geometrically to four 2m vertical modules.
This explains the modular height relationship.
However, the total of 22 standards does not establish the exact number of support positions or the distribution of every standard.
Those details must follow the confirmed assembly drawing.
The standards form the vertical structure to which the horizontal and diagonal members are connected.
4. Horizontal Members — 35 Pieces
The BOQ includes:
35 × Horizontal Pipes, L = 2m
These connect the vertical standards across the modular bays.
The tower uses a 4m-wide and 2m-deep arrangement.
The repeated 2m horizontal member length is consistent with this modular geometry.
The horizontal pipes form part of the main Ringlock support framework.
They should not be interpreted as independently rated speaker hanging beams.
Their actual structural role depends on their location and connection arrangement.
5. Diagonal Bracing — 29 Pieces
The BOQ includes:
29 × LR3 Diagonal Pipes, L = 2.44m
These diagonal members form part of the tower's bracing arrangement.
The structure uses diagonal bracing within its vertical Ringlock framework.
This is an important distinction from a simple unbraced arrangement of vertical posts and horizontal pipes.
However, the number of diagonal members does not establish the tower's allowable speaker weight, lateral capacity or wind resistance.
Those values require verification for the complete configuration.
6. Adjustable Bases — 8 Pieces
The structure includes:
8 × LR4 Adjustable Bases, H = 0.25m
These provide adjustable lower support positions.
The bases form part of the modular Ringlock structure.
Their presence does not establish a complete foundation or anchoring arrangement.
The actual installation may require project-specific stabilization measures depending on the supporting surface, suspended equipment and site conditions.
The original BOQ does not list a defined ballast package.
7. Two Different Steel-Brace Groups
One distinguishing feature of this product is the inclusion of two different steel-brace specifications.
Steel Brace Type A
2 pieces
Dimensions:
L = 2m, H = 0.5m
Steel Brace Type B
2 pieces
Dimensions:
L = 2m, H = 0.25m
These components are separate from the 29 standard Ringlock diagonal pipes.
They should therefore remain separate in the BOQ.
The use of two brace heights indicates that the supplied configuration contains more than one steel-brace geometry.
The original product does not provide sufficient detail to establish the exact connection position or allowable load of each brace.
They should not automatically be described as certified speaker suspension points.
8. Six Pallet Modules
The published BOQ includes:
6 × Pallets
These are separate from the vertical standards, horizontal members and diagonal braces.
The pallets form an additional component group within the tower configuration.
The original source does not specify their exact dimensions, positions or individual operating functions.
Therefore, they should not automatically be described as:
Six separate working-platform levels
Six ballast positions
Six maintenance platforms
Six equipment-support decks
Those interpretations would require confirmation from the actual drawing.
For this Product page, the accurate description is that the tower includes six pallet components whose final arrangement must follow the supplied structural configuration.
9. Understanding the 4×2m Footprint
The structure has a nominal footprint of:
4m × 2m = 8m²
The overall height is 8m.
This creates a relatively tall modular framework compared with its ground footprint.
The geometry is useful for identifying the type of temporary sound-support structure.
However, the footprint should not be used by itself to determine whether the tower is suitable for a particular suspended speaker system.
Actual stability depends on the complete structural arrangement, the equipment, the installation conditions and any required stabilization measures.
10. How the Structural Modules Work Together
The structure can be understood through four functional groups.
Module A — Main Vertical Framework
The 22 Ringlock standards create the main vertical tower arrangement.
Module B — Horizontal and Diagonal Connections
The 35 horizontal pipes and 29 diagonal pipes connect and brace the modular framework.
Module C — Base and Additional Steel Supports
The eight adjustable bases and four steel braces form additional components within the support arrangement.
Module D — Pallet Components
Six pallets are supplied as a separate modular group.
Together, these components form the reference Ringlock tower configuration.
The speaker suspension interface must be confirmed separately before the structure can be evaluated for a particular line array.
11. Line Array Suspension Interface
The original product is intended for line array speaker hanging.
However, the published BOQ does not separately identify a complete speaker suspension assembly.
For example, it does not expressly list:
A dedicated aluminum hanging beam
A separately specified steel top suspension beam
A motor hoist
A lifting chain
A speaker rigging frame
Rated hanging clamps or shackles
A defined speaker suspension point
This does not prove that the reference configuration has no hanging arrangement.
It means that the supplied component list does not establish the complete interface.
The actual hanging method must be confirmed from the structural drawing and the speaker manufacturer's rigging requirements.
No allowable suspended load can be assigned from the published BOQ alone.
12. Difference from a Conventional Aluminum Truss Speaker Tower
This product uses Ringlock as its primary structural system.
A conventional aluminum truss speaker tower may instead use aluminum truss columns, beams and truss-specific connection hardware.
The Ringlock approach uses modular standards, horizontal members and diagonal braces to form the main support framework.
This allows the tower to be configured from reusable modular components.
However, the two systems should not be treated as structurally interchangeable.
Their allowable loads, connection methods and stabilization requirements depend on the actual system design.
13. Difference from the 4x2x8m Hybrid Ringlock Line Array System
DragonStage also offers a related 4×2×8m sound-support configuration with aluminum truss components.
Although both systems have the same nominal main dimensions, their confirmed component packages differ.
Feature
This Ringlock Support Frame
4×2×8m Hybrid Line Array System
Main Dimensions
4×2×8m
4×2×8m
Main Structure
Ringlock
Ringlock
Aluminum Truss
Not listed
3 CS40 truss sections
Horizontal Pipes
35 pcs
35 pcs
Diagonal Pipes
29 pcs
28 pcs
Vertical Standards
22 pcs
24 pcs
Adjustable Bases
8 pcs
6 pcs
Steel Braces
4 pcs, two heights
10 pcs
Pallets
6 pcs
18 pcs
Double Clamps
Not listed
12 pcs
Side Speaker Bracket
Not confirmed
Included
Ballast Platform
Not specified
Included
Packing Weight
Approx. 750kg
Approx. 1,070kg
Packing Volume
Approx. 2CBM
Approx. 3.5CBM
The hybrid version integrates an aluminum truss hanging system, pallet platform areas and additional equipment-support functions.
This product has a simpler published component package based primarily on Ringlock members, steel braces and pallets.
Therefore, it should not be classified as Ringlock + Aluminum Structure merely because another product with similar dimensions includes aluminum truss.
At Product level, the structure can be understood through the following general assembly relationship:
Establish the 4m-wide × 2m-deep tower footprint according to the confirmed drawing.
Position the eight adjustable bases at the specified support locations.
Assemble the 2m vertical Ringlock standards.
Install the 2m horizontal members to connect the modular framework.
Install the 2.44m diagonal members according to the specified bracing arrangement.
Incorporate the two 0.5m-high and two 0.25m-high steel braces at their confirmed positions.
Install the six pallets according to the supplied drawing.
Confirm the required speaker suspension interface and any additional rigging equipment.
Complete all required project-specific structural, stabilization and installation checks.
This describes the component relationship, not an approved erection sequence or engineering method statement.
16. Typical Applications
This type of structure may be considered for:
Concert line array support
Outdoor festival sound systems
Temporary PA installations
Stage-side speaker support
Touring event structures
Live performance sound systems
Temporary event audio infrastructure
The actual suitability depends on the speaker system, rigging arrangement, site conditions and verified structural requirements.
17. Customization Options
The published 4×2×8m configuration is one reference arrangement.
Possible project-specific changes include:
Overall tower height
Tower width and depth
Ringlock bay arrangement
Bracing layout
Steel support configuration
Pallet arrangement
Speaker suspension interface
Additional working-platform requirements
Stabilization configuration
Changing the height or footprint may require changes to the complete structural arrangement.
Likewise, changing the speaker weight or hanging position may require a different support and rigging configuration.
The final proposal should therefore be based on the actual line array system and installation conditions.
18. Information Required for a Similar Structure
For a similar line array support project, please provide:
Speaker manufacturer and model
Number of speaker cabinets
Total suspended speaker weight
Speaker rigging-frame specifications
Required hanging height
Required hanging position
Indoor or outdoor use
Project location
Ground and site conditions
Available installation footprint
Preferred suspension method
Existing compatible Ringlock equipment
Reference drawings or site photographs
The total speaker weight and suspension arrangement are particularly important because the published BOQ does not establish the complete hanging interface or allowable structural capacity.
19. Engineering and Verification Boundary
The original product confirms:
4m overall width
2m overall depth
8m overall height
35 horizontal pipes
29 diagonal pipes
22 vertical standards
8 adjustable bases
2 steel braces at 2m × 0.5m
2 steel braces at 2m × 0.25m
6 pallets
Approximately 750kg packing weight
Approximately 2CBM packing volume
The published information does not establish:
Maximum allowable suspended speaker weight
Allowable suspension-point load
Complete hanging-beam specification
Rated lifting or rigging accessories
Wind resistance
Required ballast
Anchoring requirements
Foundation requirements
Ground-bearing capacity
Safety factors
Structural certification
Local regulatory compliance
Engineering approval
The structure is presented as a temporary sound-support framework.
Its suitability for a specific speaker system must be confirmed through the final structural and rigging design.
DragonStructure explains the structural configuration, component relationships and modular assembly logic.
DragonTruss provides the original commercial product listing, current pricing and supply information.
For customized dimensions, speaker hanging arrangements or additional rigging equipment, the final quotation may differ from the published reference configuration.
FAQ
1. What is the overall size of this Ringlock sound-support structure?
The confirmed structure measures 4m wide, 2m deep and 8m high.
2. What is the main structural system?
The main structure uses modular Ringlock standards, horizontal members, diagonal braces and adjustable bases.
3. How many vertical standards are included?
The BOQ includes 22 vertical standards, each 2m long.
4. How many horizontal and diagonal members are included?
The structure includes 35 horizontal pipes at 2m and 29 diagonal pipes at 2.44m.
5. Why are two steel-brace sizes included?
The published configuration includes two 2m × 0.5m steel braces and two 2m × 0.25m steel braces. Their exact positions and functions must follow the structural drawing.
6. How many pallets are included?
The confirmed package contains six pallets. Their exact positions and operational functions are not specified in the published BOQ.
7. Does the product include a speaker hanging beam?
The original BOQ does not separately identify a complete hanging beam or suspension assembly. The required interface should be confirmed before installation.
8. Are the line array speakers included?
No. The confirmed product is the support structure and listed components. The speakers and associated audio equipment are not included unless expressly stated in a quotation.
9. Can this structure support any line array speaker system?
No universal compatibility or allowable load is established. Suitability depends on the actual speaker weight, rigging method and verified structural configuration.
10. Does the product include a motor hoist?
A motor hoist is not listed in the confirmed BOQ.
11. Does the structure include ballast?
No defined ballast package is listed. Any ballast or anchoring requirements must be determined for the actual installation.
12. Is this suitable for outdoor concerts?
It is intended for temporary concert and event applications. Outdoor suitability requires consideration of wind, ground conditions, equipment loading and project-specific engineering verification.
13. How does this differ from the hybrid Ringlock and aluminum truss version?
The hybrid version includes aluminum truss components and additional support modules. This product's confirmed BOQ is primarily Ringlock members, steel braces and pallets.
14. Can the tower height be customized?
Yes. Different heights and support layouts may be considered, subject to confirmation of the complete structural configuration.
Why Rental Companies Put Ground-Supported LED Walls on Stage Risers—and What We Check Before Recommending It
Why Rental Companies Put Ground-Supported LED Walls on Stage Risers—and What We Check Before Recommending ItProject BackgroundThis case analysis started from a public discussion in the video-engineering industry.The question was simple:Why are more ground-supported LED walls being installed on stage
2026-10-30
How We Turned Standard Stage Stairs into a Movable Indoor Venue Entrance System
How We Turned Standard Stage Stairs into a Movable Indoor Venue Entrance SystemProject BackgroundThis project came from an indoor sports and event venue in the Americas.For confidentiality reasons, we do not identify the country or whether the venue is located in North or South America.The venue had
2026-11-13
Why We Use Pivoting Adjustable Stairs Between Different Stage Heights
Why We Use Pivoting Adjustable Stairs Between Different Stage HeightsProject BackgroundA common question in temporary stage systems is:Can one stair unit be used with different stage heights?At first, this sounds like a simple compatibility question.But from a stage manufacturer's point of view, the
2026-11-06
Why a Single Clamped Tube Can Make an LED Wall Difficult to Keep Vertical
Why a Single Clamped Tube Can Make an LED Wall Difficult to Keep VerticalProject BackgroundThis case analysis started from a public video-engineering discussion.The user needed to mount LED panels onto a truss structure.The tested solution used:a single horizontal tube;O-clamps / tube clamps;LED mod
2026-10-17
Why We Split Large Custom Bar Truss Structures After the Overall Design Is Approved
Why We Design Large Custom Bar Truss as One Structure First—and Then Split It for Production and Site AccessProject BackgroundMany of our custom aluminum-truss projects for bars, clubs and entertainment venues begin with the same contradiction.The venue owner or design team wants a large, visually c
Why Rental Companies Put Ground-Supported LED Walls on Stage Risers—and What We Check Before Recommending It
Why Rental Companies Put Ground-Supported LED Walls on Stage Risers—and What We Check Before Recommending ItProject BackgroundThis case analysis started from a public discussion in the video-engineering industry.The question was simple:Why are more ground-supported LED walls being installed on stage
2026-10-30
How We Turned Standard Stage Stairs into a Movable Indoor Venue Entrance System
How We Turned Standard Stage Stairs into a Movable Indoor Venue Entrance SystemProject BackgroundThis project came from an indoor sports and event venue in the Americas.For confidentiality reasons, we do not identify the country or whether the venue is located in North or South America.The venue had
2026-10-30
Why We Use Pivoting Adjustable Stairs Between Different Stage Heights
Why We Use Pivoting Adjustable Stairs Between Different Stage HeightsProject BackgroundA common question in temporary stage systems is:Can one stair unit be used with different stage heights?At first, this sounds like a simple compatibility question.But from a stage manufacturer's point of view, the
2026-11-13
Why a Single Clamped Tube Can Make an LED Wall Difficult to Keep Vertical
Why a Single Clamped Tube Can Make an LED Wall Difficult to Keep VerticalProject BackgroundThis case analysis started from a public video-engineering discussion.The user needed to mount LED panels onto a truss structure.The tested solution used:a single horizontal tube;O-clamps / tube clamps;LED mod
2026-11-06
Why We Split Large Custom Bar Truss Structures After the Overall Design Is Approved
Why We Design Large Custom Bar Truss as One Structure First—and Then Split It for Production and Site AccessProject BackgroundMany of our custom aluminum-truss projects for bars, clubs and entertainment venues begin with the same contradiction.The venue owner or design team wants a large, visually c
DragonStructure is a specialized platform created to explore modular temporary structures, structural applications and system integration for events and other professional temporary-structure projects.