8m Hybrid Ringlock LED Cantilever Support Tower with 4m Auxiliary Ballast Section
An 8m-high hybrid Ringlock LED suspension structure with a 2m × 4m footprint, consisting of a main 8m Ringlock tower and a connected 4m auxiliary ballast section. A projecting upper support arrangement incorporates a CS40 aluminum square truss with a nominal 400mm section for LED screen hanging. The configuration combines modular Ringlock standards, horizontal members, diagonal bracing, steel support components, aluminum truss and double clamps into one temporary LED support system.
This structure is designed for temporary LED screen suspension at concerts, festivals and other event installations.
It consists of two connected Ringlock sections with different heights:
An 8m main tower that forms the principal vertical support structure.
A 4m auxiliary tower that incorporates the lower ballast-support area.
The overall footprint is approximately 2m wide × 4m deep.
At the upper portion of the main tower, a projecting cantilever arrangement incorporates a 400mm-class aluminum square truss. This creates the intended LED hanging position beyond the main vertical tower framework.
The structure is therefore not simply a conventional scaffold tower with an LED screen attached.
Its defining feature is the integration of three distinct structural functions:
Vertical Ringlock Support + Projecting Aluminum Truss Suspension + Lower Auxiliary Ballast Area
The configuration is a compact example of a hybrid LED support structure in which the main framework and the equipment suspension member use different structural systems.
For other configurations designed around suspended LED displays, see LED Screen Structure.
2. Overall Structural Configuration
Item
Confirmed Specification
Overall Footprint
2m W × 4m D
Main Tower Height
8m
Auxiliary Tower Height
4m
Maximum Main Tower Height
8m
Main Framework
Ringlock
Structural Arrangement
Two connected Ringlock towers
Upper Suspension Arrangement
Projecting cantilever support
Aluminum Hanging Member
CS40 square truss
Truss Section
389 × 389mm
Truss Member Length
2500mm
Truss Quantity
1 pc
Truss Connections
Double clamps
Lower Auxiliary Function
Ballast-support area
Packing Weight
Approximately 670kg
Packing Volume
Approximately 2CBM
Main Application
Temporary LED screen hanging
The 389 × 389mm CS40 section belongs to the nominal 400mm square-truss family.
The 2500mm dimension identifies the listed truss member length. It does not independently establish the effective cantilever projection, usable hanging length or permissible suspension point.
3. Structural Breakdown: Five Main Modules
Module A — 8m Main Ringlock Tower
The 8m main tower forms the full-height vertical framework.
Its modular construction uses Ringlock standards, horizontal ledgers and diagonal braces.
The 2m vertical standards allow the structure to be configured through repeated modular height sections.
The main tower is also the part of the structure associated with the upper LED suspension arrangement.
It is important to distinguish the height of the tower from the location of the LED hanging point. The actual hanging elevation depends on the installed upper support geometry and LED rigging configuration.
The Ringlock framework creates the primary tower body, while the aluminum truss is used for the projecting hanging interface.
Module B — 4m Auxiliary Ballast Tower
The second Ringlock tower reaches 4m high and connects to the main tower.
Its lower area provides a designated ballast position.
This auxiliary section is a structural part of the complete 2×4m configuration, not a separate freestanding tower supplied for independent use.
The 4m height creates a lower connected structural zone while leaving the main tower to continue upward to 8m.
This height difference is a defining characteristic of the system.
The ballast position identifies where ballast may be arranged, but it does not establish the ballast mass or stabilization performance.
The exact ballast arrangement must be determined for the real project.
Module C — Projecting Cantilever Support
The upper structure includes a projecting cantilever arrangement.
This creates an LED hanging position outside the main vertical tower framework.
The projection matters because the LED screen is not simply installed directly against the face of the Ringlock tower.
Instead, the hanging member extends from the upper structural area.
In practical structural terms, the geometry of this projection affects the relationship between the screen position, the main tower and the auxiliary ballast area.
However, the published product does not provide a verified cantilever moment, allowable projection load or engineering calculation.
The precise connection between the cantilever components and the main Ringlock framework must follow the project drawing.
Module D — CS40 Aluminum Truss and Double Clamps
The listed aluminum truss is:
CS40 Square Truss — 389 × 389 × 2500mm
Quantity: 1 pc.
Four double clamps are also included.
The truss provides the aluminum component of the upper LED hanging arrangement.
The clamps form part of the interface between structural members, but the published BOQ does not identify every clamp location or connection detail.
The CS40 member should not be treated as a complete independently rated LED hanging system simply because it is a 400mm-class truss.
Its suitability depends on the installed support arrangement, connection details, suspension positions and actual LED screen load.
These are separate from the main Ringlock pipes and upper aluminum truss.
The original product identifies a lower ballast area, but does not provide sufficient detail to assign a specific structural function or location to every pallet and support component.
Accordingly, these components should remain separately identified in the BOQ.
They should not be described as a complete elevated maintenance platform, staircase or independently verified ballast deck without further drawings.
4. Complete Bill of Quantities (BOQ)
No.
Component
Specification
Quantity
1
Horizontal Pipe
L = 2m
29 pcs
2
Diagonal Pipe LR3
L = 2.44m
22 pcs
3
Vertical Standard LR1
L = 2m
20 pcs
4
Adjustable Base LR4
H = 0.25m
6 pcs
5
Steel Brace
L = 2m, H = 0.25m
4 pcs
6
CS40 Aluminum Square Truss
389 × 389 × 2500mm
1 pc
7
Double Clamp
Connection component
4 pcs
8
Pallet
Dimensions not specified
3 pcs
9
Support
Dimensions not specified
2 pcs
Total Listed Components: 91 pcs
Approximate Packing Weight: 670kg
Approximate Packing Volume: 2CBM
The 91-piece total is the sum of the nine listed BOQ quantities. It does not include any unlisted accessories.
The published BOQ does not separately identify the LED display, rigging hardware, lifting equipment, ballast blocks, water tanks or a specified ballast weight.
It also does not allocate the Ringlock pipe quantities between the 8m main tower and the 4m auxiliary tower.
This is a complete-system component list, not two separately quantified tower packages.
5. How the Ringlock Framework Is Organized
The structure uses 20 vertical standards, 29 horizontal members and 22 diagonal members.
These components form the modular framework across the connected main and auxiliary sections.
The six adjustable bases establish the lower support positions.
The four additional steel braces are separately listed from the Ringlock diagonal members.
This distinction is important when preparing a component quotation or checking an existing Ringlock inventory.
A customer may already own compatible standards, ledgers or diagonal members, but the upper cantilever arrangement, clamps and other specific support components still need to be reviewed separately.
The difference is not only the overall dimensions. The number and distribution of hanging members also change the structural configuration.
10. Comparison with the Previous 2×4×8m Line Array Tower
This LED cantilever structure shares the same nominal footprint and tower heights as a related Ringlock line array support product.
However, the upper support arrangement is different.
Feature
This LED Cantilever Structure
Related Line Array Structure
Main Function
LED screen suspension
Line array speaker suspension
Main Tower
8m
8m
Auxiliary Tower
4m
4m
Footprint
2×4m
2×4m
Upper Member
CS40 aluminum square truss
2.8m steel section beam
Upper Geometry
Projecting cantilever arrangement
Steel hanging beam
Main Framework
Ringlock
Ringlock
Packing Weight
Approx. 670kg
Approx. 680kg
Packing Volume
Approx. 2CBM
Approx. 2CBM
The two structures should not be considered identical simply because their main dimensions match.
The change from a steel speaker hanging beam to an aluminum-truss LED cantilever introduces a different suspension interface and component package.
The intended equipment, hanging geometry and connection requirements must be assessed separately.
11. General Assembly Logic
The structure can be understood through the following modular sequence:
Establish the 2×4m footprint using the approved layout.
Position the six adjustable bases at their specified locations.
Assemble the lower Ringlock framework connecting the main and auxiliary tower sections.
Install the horizontal and diagonal members according to the drawing.
Install the additional steel braces at their specified positions.
Continue the main tower toward its 8m height.
Complete the auxiliary tower at its 4m height.
Install the lower pallet and support components according to the configuration.
Integrate the upper projecting cantilever support.
Install the CS40 aluminum truss and double-clamp connections.
Complete the required rigging, ballast arrangement, connection checks and structural verification before suspending the LED display.
This describes the relationship between the modular components.
It is not an approved installation sequence or lifting method.
12. Typical Applications
The configuration may be considered for:
Concert LED side-screen installations.
Festival LED display support.
Temporary outdoor event video walls.
Suspended LED screens beside performance stages.
Modular LED support systems for rental companies.
Event sites where the screen must be positioned away from the main tower framework.
The exact application depends on the screen size, weight, hanging arrangement and site conditions.
The structure is especially relevant when comparing different LED screen support system configurations and deciding whether a projecting truss arrangement is required.
13. What Changes When the LED Screen Changes?
The reference configuration uses one CS40 aluminum truss member.
That does not mean every LED screen can be accommodated by the same upper arrangement.
Several variables may require changes to the structure.
LED Screen Width and Height
The display dimensions determine the intended hanging geometry and the amount of space needed around the screen.
Total LED Screen Weight
The total suspended weight includes the LED cabinets and relevant rigging components.
This information is essential before checking the hanging member and complete structure.
Hanging Position
The distance between the LED screen and the main tower affects the cantilever geometry.
The effective projection must be established from the drawing rather than assumed from the truss member length.
Screen Orientation
Portrait and landscape LED arrangements may create different hanging-point layouts.
Installation Environment
Indoor and outdoor applications can require different structural checks.
Ballast and Ground Conditions
The auxiliary tower contains a ballast position, but the final stabilization arrangement depends on the complete project.
15. Information Required for a Customized LED Support Proposal
Customers should provide:
LED screen width and height.
LED cabinet size and quantity.
Total suspended LED screen weight.
Rigging-bar and hanging-point details.
Required screen bottom clearance.
Required hanging elevation.
Available ground footprint.
Required cantilever projection.
Indoor or outdoor application.
Event location and site conditions.
Existing Ringlock or aluminum truss inventory.
Ballast or anchoring constraints.
Site photographs, reference drawings or installation sketches.
The more accurately these details are provided, the easier it is to identify whether the reference configuration is suitable or needs modification.
16. Engineering and Verification Boundary
The published product information confirms the structure's main dimensions, two connected tower sections, projecting upper LED hanging arrangement, CS40 aluminum truss, listed BOQ quantities and approximate packing data.
It does not establish:
Allowable suspended LED screen weight.
Maximum cantilever load.
Effective cantilever projection.
Permitted truss hanging-point load.
Double-clamp connection capacity in the complete assembly.
Required ballast mass.
Wind rating.
Ground-bearing requirements.
Anchoring or foundation requirements.
Structural safety factors.
Certification, compliance or engineering approval.
The approximate 670kg packing weight is a shipping figure, not a load rating.
A project-specific structural and rigging review is necessary before the system is used to suspend an LED screen.
17. Related Larger LED Support Structures
This compact tower can also be compared with larger Ringlock LED frameworks.
These references demonstrate why LED support structures should be classified by their complete geometry and function rather than simply by their use of Ringlock components.
18. Original DragonTruss Product and Pricing
Original Product:
2x4x8m Ringlock LED Hanging System with Auxiliary Ballast Tower and 400mm Cantilever Truss
This DragonStructure page explains the modular arrangement, upper cantilever support, Ringlock-to-aluminum integration and auxiliary ballast section.
For current pricing, product availability, commercial specifications and customized quotations, visit:
The DragonTruss listing is the recommended commercial reference. Final pricing and supply scope should be confirmed for the actual project.
Frequently Asked Questions
1. What is the overall size of this LED cantilever structure?
The complete footprint is approximately 2m wide × 4m deep. The main Ringlock tower reaches 8m, while the auxiliary tower reaches 4m.
2. Why does the structure have two different tower heights?
The main tower provides the upper LED hanging position, while the lower auxiliary section provides a connected structural area with a designated ballast position.
3. What is used to suspend the LED screen?
The upper hanging arrangement incorporates a projecting cantilever support and a CS40 aluminum square truss.
4. Is the truss exactly 400×400mm?
The listed CS40 truss has a 389×389mm square section and a 2500mm member length. It belongs to the nominal 400mm truss family.
5. Is the 2.5m truss length the actual cantilever projection?
Not necessarily. The 2.5m dimension is the listed member length. The effective projection depends on the installed arrangement and connections.
6. How many aluminum truss members are included?
The published BOQ lists one CS40 aluminum square truss member.
7. How many double clamps are included?
Four double clamps are listed.
8. How many Ringlock standards are included?
The complete package contains 20 vertical standards, each 2m long.
9. Is this a pure aluminum truss structure?
No. The main framework uses Ringlock, while the upper LED hanging member uses aluminum truss. It is a hybrid Ringlock and aluminum structure.
10. Is ballast included?
The structure has a designated ballast area, but the published BOQ does not specify a supplied ballast mass or a number of ballast tanks.
11. What is the maximum LED screen weight?
No verified allowable LED screen weight is provided. The permitted load must be established for the complete structure and actual rigging arrangement.
12. Can this tower be used outdoors?
It is intended for temporary event applications, including outdoor events, subject to appropriate project-specific structural and environmental verification.
13. Can the structure be customized?
Yes. The tower geometry, LED hanging arrangement and related components can be reviewed for a different project requirement.
14. What is the approximate packing weight?
The listed packing weight is approximately 670kg, with a volume of about 2CBM.
Why Rental Companies Put Ground-Supported LED Walls on Stage Risers—and What We Check Before Recommending It
Why Rental Companies Put Ground-Supported LED Walls on Stage Risers—and What We Check Before Recommending ItProject BackgroundThis case analysis started from a public discussion in the video-engineering industry.The question was simple:Why are more ground-supported LED walls being installed on stage
2026-10-30
How We Turned Standard Stage Stairs into a Movable Indoor Venue Entrance System
How We Turned Standard Stage Stairs into a Movable Indoor Venue Entrance SystemProject BackgroundThis project came from an indoor sports and event venue in the Americas.For confidentiality reasons, we do not identify the country or whether the venue is located in North or South America.The venue had
2026-11-13
Why We Use Pivoting Adjustable Stairs Between Different Stage Heights
Why We Use Pivoting Adjustable Stairs Between Different Stage HeightsProject BackgroundA common question in temporary stage systems is:Can one stair unit be used with different stage heights?At first, this sounds like a simple compatibility question.But from a stage manufacturer's point of view, the
2026-11-06
Why a Single Clamped Tube Can Make an LED Wall Difficult to Keep Vertical
Why a Single Clamped Tube Can Make an LED Wall Difficult to Keep VerticalProject BackgroundThis case analysis started from a public video-engineering discussion.The user needed to mount LED panels onto a truss structure.The tested solution used:a single horizontal tube;O-clamps / tube clamps;LED mod
2026-10-17
Why We Split Large Custom Bar Truss Structures After the Overall Design Is Approved
Why We Design Large Custom Bar Truss as One Structure First—and Then Split It for Production and Site AccessProject BackgroundMany of our custom aluminum-truss projects for bars, clubs and entertainment venues begin with the same contradiction.The venue owner or design team wants a large, visually c
Why Rental Companies Put Ground-Supported LED Walls on Stage Risers—and What We Check Before Recommending It
Why Rental Companies Put Ground-Supported LED Walls on Stage Risers—and What We Check Before Recommending ItProject BackgroundThis case analysis started from a public discussion in the video-engineering industry.The question was simple:Why are more ground-supported LED walls being installed on stage
2026-10-30
How We Turned Standard Stage Stairs into a Movable Indoor Venue Entrance System
How We Turned Standard Stage Stairs into a Movable Indoor Venue Entrance SystemProject BackgroundThis project came from an indoor sports and event venue in the Americas.For confidentiality reasons, we do not identify the country or whether the venue is located in North or South America.The venue had
2026-10-30
Why We Use Pivoting Adjustable Stairs Between Different Stage Heights
Why We Use Pivoting Adjustable Stairs Between Different Stage HeightsProject BackgroundA common question in temporary stage systems is:Can one stair unit be used with different stage heights?At first, this sounds like a simple compatibility question.But from a stage manufacturer's point of view, the
2026-11-13
Why a Single Clamped Tube Can Make an LED Wall Difficult to Keep Vertical
Why a Single Clamped Tube Can Make an LED Wall Difficult to Keep VerticalProject BackgroundThis case analysis started from a public video-engineering discussion.The user needed to mount LED panels onto a truss structure.The tested solution used:a single horizontal tube;O-clamps / tube clamps;LED mod
2026-11-06
Why We Split Large Custom Bar Truss Structures After the Overall Design Is Approved
Why We Design Large Custom Bar Truss as One Structure First—and Then Split It for Production and Site AccessProject BackgroundMany of our custom aluminum-truss projects for bars, clubs and entertainment venues begin with the same contradiction.The venue owner or design team wants a large, visually c
DragonStructure is a specialized platform created to explore modular temporary structures, structural applications and system integration for events and other professional temporary-structure projects.